BASE MACHINE The ELIX machine allows to perform boring operations, glue injection and dowel insertion on horizontal panels. The Machine is Composed of: selection of working references (Rh or Lh panel) programmable by NC X axis assembled on preloaded ball guides and carriage movement with Brushless motor through ground ball screws . automatic tool offset selection for inserting performances and general operations on the Rh and Lh references; easy and intuitive software interface. Main Technical Specifications X- Axis: stroke: 1300 mm assembled couple: 2,4 Nm head movement speed: 50m/min Z Axis (manual adjustment): stroke: 40 mm Boring Unit: Nr. of boring units: 1 bit rotation speed: 6000 rpm max. bores depth: 30 mm max. bits diameter: 12 mm manual adjustment of the boring depth with digital indication (siko) Glue System glue tank capacity: 8 Lt max. glue density: 900 cps glue electronic proportioning glue injector equipped with sensor Dowel Insertion Unit: Nr. of dowel insertion units: 1 standard dowel dimensions: ø 8x30 max. dowel projection: 14 mm dowel unloading system with vertical pneumatic cylinder distance between boring bit and glue/dowel insertion unit: 64 mm Panel Standard Dimensions: max. width: 1300 mm thickness: 10-40 mm min. depth: 120 mm Numerical Control: INDUSTRIAL Numerical Control Main technical specifications: Monitor LCD LED 7" with Touch Screen 800x480 USB port Ethernet card RS232 serial port Program Editor: - Absolute programming table with Drill- Glue – Dowel flag - Parametric programming - Up to 20 Variable - Logical conditions. Working List: - List manager with multiprograms - Program name, Pieces length, Program repetitions, working area, variable. - Pieces drawing - Load & save the working list General Specifications: Voltage: 220V 3Ph 50-60Hz Control voltage 24 V Air pressure: 7 bar

Biesse Elix B Boring Machine

Biesse Elix K3

(14) spindles with 1-1/2 hp motors on each. On/off switch for each motor. chucks adjust to grip up to 1/2” bit stroke adjustable from 4” to 10” 121” x 39-1/2” table with (4) hold downs Adjustable speed hydraulic feed 230 volt 3 phase

3/4 HP 1725 rpm motor 115/208/230 volt single phase approx. 12” x 30” table Jacobs chuck approx. 3/4” footpedal Assorted fixtures and tooling as pictured.

Gannomat Pro-Line 50 • Row of holes as well as line drilling in the SYSTEM 32 mm • 50 (2 x 25) holes in one drilling cycle

Homag D-200 Drill & Dowel Inserter

Interwood B3223 Boring Machine 23-Spindles Manufacturer Specs (to be confirmed): (2) 1.5kw, 220/380v, 3ph motors (2) banks of (23) drills 32mm drill spacing (8) spring hold downs (2) pneumatic locators 50-1/2 inch x 30 inch table Pneumatic operation / foot pedal

Ironwood BR23 Boring Machine 230V/3PH

1- 5mm Boring and Inserting Unit with Vibratory Hopper 1-8mm Boring and Inserting Unit with Vibratory Hopper Power: 208v-220v, 3 Phase, 30 Amps 96? Maximum Work Zone 4 zone stops 3-Axis Control For Positioning Weight 6,000lbs Solid One-Piece Welded Tubular Steel Frame Footprint (L x W x H): 135? x 45? x 82? Shipping Dimensions (L x W x H): 42.3? x 49? x 43? Shipping Weight: 7500 lbs

Single horizontal drill and dowel; 1300 mm work table with four fields; sure shot revolver system to guarantee the fastest cycle time, average one second, and extreme reliability; simple user friendly touch screen; heavy duty steel frame for maximum rigidity; large phenolic table with robust clamps suitable also for delicate materials; barcoding and ethernet ready; laser for measuring the part and populate the program;

This machine has been cleaned, repaired and checked over, ready for a new home! (2) 3HP motors 460V 3Ph 6 pneumatic stops for use in horizontal or vertical drilling 72" precision machined back fence 6 fence stops, 4 table stops (2) 23-spindle drilling heads, one horizontal, one vertical 3-position turret dept stop on vertical head 5 pneumatic holddowns Magnetic motor controls 32mm spindle centers 10mm collet diameter 1725 RPM spindle speed 90 PSI air requirement 3" max. drill stroke

35 spindles (vertical/horizontal) 32mn spacing left/right fences quick release chucks 2800 rpm spindle speed 5 HP 3 Phase

Vitap Forma Boring Machine 21 Vertical Spindles 21 Horizontal Spindles Approx $1000 worth of carbide bits DUAL LINE machine and there are (2) vertical lines of 21 spindles each for a total of 42 ...... PLUS an additional single line of 21 horizontal spindles!

Weeke ABD 050

Weeke ABD 060 Bore & Dowel Machine This machine will be available in December 2023. - CNC DOWEL INSERTER FOR HORIZONTAL DRILLING AND DOWEL INSERTING - ENGINEERED TO SPRAY GLUE OR WATER - FEATURES A SORBTECH MAIN BEAM TO MINIMIZE VIBRATION - PNEUMATIC CONTROL OF CEBTER STOP AND RIGHT AND LEFT FENCES - OPEN END TABLE FOR MACHINING PARTS LONGER THAN 48” - VIBRATING HOPPER FOR AUTOMATIC FEEDING OF DOWELS - LARGER 17” DISPLAY AND WOODWOP PROGRAMMING - SERVO CONTROL OF DRILL HEIGHT AND DRILL DEPTH VIA PROGRAM - 3 INDEPENDENT SPINDLES ON 32MM CENTERS - BAR CODE READER

Weeke ABD 050